A mass creation of Frame + Lens is done in the same way as any other mass update on iWiCatalog.

You have to either check the wanted frames on the Frame interface and then click on the red Checked button or click directly on the blue All button if you want to update all the frames.

You will have to click on the Combination tab and then:

1. Search for the lens(es) to be associated either via the search bar or by sorting by groupment via the drop-down menu.

2. If you want to select one or more lens(es), you will have to tick at the beginning of the line those you want. If you want to combine all the lenses, go directly to the step 3 by clicking on the All button.

3. In order to load your lenses, you must either click on the Checked button if you have chosen one or more lens(es) or on the All button if you have chosen all the lenses.

4. The selected products will appear on the right. A red cross to the right of each one will allow you to remove them.

5. A second window will open automatically and you will be able to choose the options to be attributed to your lenses. You will then have to repeat the same process. The selected products will appear on the right. A red cross placed to the right of each one will allow you to remove them.

6. When you think you have finished your selection of lenses (and options), just click on the Update button at the bottom right to validate your additions.

Below you will see that in the iZyLabManager tab, you will find three options that allow you to insert an optional thickness and/or calculation in the Webshop. You can also enter a name.

Open