iZySolutions - Documentation

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Exports of this format have some particularities, which are listed below:

LensType.DAT

The following options are not exported (unless the option exists with a different setting than below) but allow you to indicate particularities on the lenses:

  1. Mandatory option of type Special Manufacturing and subtype Manufacturer's calculation (precal) indicate that the precal is included (MDM incl.: data 23, position 94).

  2. Mandatory and included (at least) options of type Photochromic are not exported but indicate (Photochromic: data 18, position 89) that the lens is photochromic.

  3. Mandatory and included (at least) Polarizing options are not exported but indicate (Polarizing: data 42, position 139) that the lens is polarizing.

  4. Mandatory and included (at least) blue light filters are not exported but indicate (BlueLightFilter inkl.: data 46, position 143) that the lens contains an included blue light filter.

  5. A mandatory and included (at least) option containing control type 51 (i.e. custom lens) (Aspheric lens: data 14, position 85) indicates that the lens is FreeForm (value 3) and is not exported.

  6. A mandatory and included (at least) option of type Surface treatment and subtype Anti-reflective indicates that the lens contains the type of anti-reflective coating listed in the Anti-reflective coating category list (ET contained: data 16, position 87).

  7. A mandatory and included (at least) surcharge of Surface treatment type allows to indicate the values 1 (Anti-scratch) or 2 (Super anti-scratch) (Hard coating incl.: data 19, position 90)

  8. A mandatory and included (at least) surcharge of Surface treatment type allows to indicate the values 1 (Anti-fouling) or 2 (Super-fouling) (Clean coating incl.: data 20, position 91)

  9. Mandatory and included options of type Special manufacture and subtype Special thickness indicate that the standard thickness is not included (non-standard diameters incl.: data 24, position 95) with the value 1.

  10. Mandatory and included options of type Special manufacture and subtype Special diameter indicate that the standard diameter is not included (Non-standard thickness incl.: data 25, position 96).

Options.DAT

  1. An option of type Special Manufacturing and subtype Manufacturer's Calculation (pre-calculated) indicates:

    1. 3=optimized (Deviating diameter: data 18, position 76) and

    2. 2=thickness reduction system / MDM (Deviating diameter: data 19, position 77)

  2. An option of type Special manufacture and subtype Decentration indicates 1 in the data (Decentration: data 24, position 82)

  3. An option of type Special manufacture and subtype Special thickness indicates 1 in the data (Deviating thickness: data 19, position 77)

  4. An option of type Special manufacture and subtype Special diameter indicates 1 in the data (Deviating diameter: data 19, position 77)

  5. An option of type Special manufacture and subtype Ovalized lens indicates 1 in the data (Deviating shape: data 22, position 80)

  6. An option of type Special Manufacturing and subtype Special Base indicates 1 in the data (Deviating base curve: data 20, position 78)

  7. A surface treatment option allows the values 1 (Anti-scratch) or 2 (Super anti-scratch) to be indicated (Hard coating incl.: data 13, position 71).

  8. An option type supplement allows the values 1 (Anti-fouling) or 2 (Super-fouling) to be indicated (Clean coating incl.: data 14, position 72).

  9. An option of type Tint and subtype Special will be changed to value 2 = tinted (Color: data 11, position 69)

  • No labels

© 2018 iZySolutions