The technical file expected by GrandVision corresponds to a standardized file such as SF6 that meets the optical standards.
iWiCatalog is a tool conceived to generate this type of format.
All data included in iWiCatalog (except specific data generated by Grand Vision) are verified and expected in the optical standards which certifies your catalog's conformity.

The SF6 format is the one we will use as a technical file for Grand Vision because it holds the maximum of data expected from their side.
The data not present will be completed by the commercial file (to be seen in another documentation → 📘COMMERCIAL FILE - Integrated lens ).

HOW TO GENERATE IT?

As for all your exports, the SF6 format is to be selected during your setup:

Open

SF6 export configuration

Below are the parameters to use to set up the Grand Vision technical file export:

Open

SF6 GV export parameters

HOW TO VERIFY IT?

When your export is launched, you need to access the Logs tab (2) to check its status and retrieve the expected file.

If the status (3) is:

• Error -> consult the error report (4) provided by iWi. Correct the errors then restart an export until the file is correct. GV and iZy can help you if you have any problems.

• Finish -> click on the floppy disk icon (5) to download the technical file.

HOW TO SEND IT?

For the moment, please send you files by mail to GrandVision contact.

⚠️Part on hold until the platform is set up.⚠️