It allows you to put commercial information in catalogues.
The Marketing tab is used to enter marketing information in your catalogs.
Status in the catalogue
...
Validity start (allows to anticipate catalogues)
Validity end (closing the product in the catalogues)
...
Prices
Allows you to manage different pricing policies with different details. Ex :
One price only,
Prices depend on the index and the lens type
Prices according to designs and materials.
etc....
By default two types of prices can be indicated in iWi, it is possible to have 6. For information, the catalogues allow up to 5 different prices depending on the format.
...
Additional delay
Allows you to indicate in the catalogue what time limit is added to an ordered lens.
...
The product page
Allows to highlight links (general site or page intended for the product) to the manufacturer or distributor's site.
...
The additional information is used to inform the customer about the product.
...
The essential characteristics are linked to the French market for quotations.
...
SF6 characteristics is intended for the SF6
...
For further information, click on the following link 👉 IWICATALOG - Statut et état des produits.
Automatic generation of combined lens range options price
This frame is used to establish the options' price policy.
The Price type list is very detailed and enables precise pricing to be determined according to various lens parameters. This section should show the most representative prices.
In the table below, we will show you some examples of price types. All other types not shown in this table obviously work on the same principle.
The other possibilities for the price types are :
Single price
- Type of ophthalmic lens
Geometry
- Ophthalmic lens base material
- Reference refractive index
- Reference refractive index/Ophthalmic lens base material
- Type of ophthalmic lens/Reference refractive index
- Type of ophthalmic lens/Geometry
- Type of ophthalmic lens/Ophthalmic lens base material
- Geometry/Reference refractive index
- Geometry/Ophthalmic lens base material
- Ophthalmic lens base material/Reference refractive index
If your company is set up in Design and Material then you will have access to the following elements:
Material
Design
Material/Design
Material/Lens type
Material/Geometry
Design/Material
Design/Reference refractive index
If the prices are different for a groupment, they must be indicated on the option of the groupment. For a groupment, prices along with the price policies can be modified.
All price exceptions must be managed in the specific prices tab.
Single Price Entered by default and is used to communicate a single option price to all the combined lenses | |
---|---|
Type of ophthalmic lens The prices indicated will be applied according to the lens type | |
Geometry The prices indicated will be applied according to the lens geometry | |
Reference refractive index/Ophthalmic lens base material The prices are indicated according to the reference refractive index and the ophthalmic lens base material. On the right side of the tables, the arrows pointing down are used to apply the defined prices on the line below. It can be used to save time in the construction of complex prices. |
Info |
---|
In the Geometry example, the Toro elliptical type does not have price. It is a choice made because this option can't be combined to this type of lens. When you choose not to enter prices you can control the parameters of the catalog, meaning in this case that if you make an Opto11 export and a validation with the EDI-Optique, there are 2 possible cases:
|
Automatic generation of combined lens range options additional delay
It is used to indicate in the catalog what delay is added on an ordered lens.
It is showed in days/hours and in working days (Monday to Friday).
SF6 charateristics
Bonusable: indicates if the option is bonusable or not, or if the reduction depends on the lens. Data 30 of the Option.dat file.
Commercial range: indicates the option range. Data 5 of the Option.dat file.
Single lens order: data 49 of the Option.dat file.
In the case of a Prismatic effect type option, new PrismGroup-1 to 5 data will appear.
You must enter the prices for the PrismGroup defined in the parameters of your catalog. See the following documentation 👉 IWICATALOG - Paramètres : Onglet Prix.
Products page
For further information, see the following link 👉 IWICATALOG - Fiches produits / Informations complémentaires.
Product information
This frame is used only for SF6 format.
For further information, see the following link 👉IWICATALOG - Création verre : Commercial.