Frame + Lenses  creation for multi update is done in the same way as any other mass update in iWiCatalog.

You must either check desired frames on the Frame interface and then click on the red Checked button or click directly on the blue All button if you want to update all frames.

You will have to click on Combination tab then:

1. Look for lense(s) to associate either via the search bar or by sorting by groupment via the drop-down menu.
2. If you want to select one or more, you must check (at the beginning of line) those desired. If you want to combine all the glasses, go directly to the step by clicking the All button.
3. To load your glasses, you must either click on the button Checked if you have chosen one or more glasses or the button All if you have chosen all glasses.
4. Selected products will appear on the right. A red cross on the right of each one will allow you to remove them.
5. A second window will automatically open, offering you the choice of supplements to assign to your glasses. You will need to reproduce the same process. Selected products will appear on the right. A red cross on the right of each one will allow you to remove them.
6. When you think you have finished your selection of glass (and options), you just have to click on the Update button at the bottom right to validate your additions.

Below, you will find that in the iZyLabManager tab, you will find three options allowing you to insert in the Webshop an optional thickness and / or a calculation.

You can also enter a name.