This screen summarizes all tracers already configured on the application. A double click on a line allows to edit tracer's configuration.

: Initializes the listening of a tracer, no file can be received or transmitted without a tracer connected.
Favorite: This feature allows you to program the application in order to connect to tracer when iZyShape is started or when tracer button of a compatible WebShop is pressed.
Status:
- For a Series tracer, port name must appear, otherwise you must reassign a port with the mouse right click on the tracer desired.
- For an IP tracer (RJ-45), globe indicates that tracer is detected on network.
Connection: This icon indicates if you are connected to the tracer. It is impossible to really know if a Series tracer is well connected because technology does not allow it. On the other hand, if an Ethernet tracer is indicated as connected, tracing will cause transmission of a shape file.

By right-clicking on a tracer, a context menu appears:

SERIE:

Port: Selects a COM port from those detected on the computer.
Settings*: Appears only after receiving a form file or Nidek protocol.

ETHERNET:

Settings*: Appears when connected to the tracer.

Parameters*: This tab is used to define the format of acquired files. In practice, default formats of tracers are supported and does not require any additional parameterization.

ANY TYPE OF TRACER

Connection/ Disconnection: Same effect as buttons on tracers board
Remove: Delete tracer permanently from the list

Browser not supported