iZySolutions - Documentation
FAQ - Lenses, options and combinations
Creating a polarizing lens
A polarizing lens is a lens that must contain a polarizing options that will be associated to the minimum mandatory included. Usually the combinations lens-options is mandatory, included and hidden.
It will be necessary to:
1.Create a Lens
Create a polarizing options (type of surface treatment options). (Check only Polarized filter)
Combine the lens and the options in Mandatory, Included and Hidden.
It is not necessary to have a polarizing options per polarizing shade. Indeed, it is simply something that will describe the lens. The optician will (in most cases) not see this options and will allow optician software to make filters on this kind of lens. This options being hidden or included will never be transmitted in EDI orders because it is an integral part of the lens.
Creating a photochromic lens
A photochromic lens is a lens that must contain a photochromic options that will be associated with the minimum mandatory, included. Usually the combinations lens-options is mandatory, included and hidden.
It will be necessary to:
1.Create a lens
2.Create a photochromic options(type of tint options).
3.Combine the lens and the options in Mandatory, Included and Hidden.
It is not necessary to have a photochromic options per tint. Indeed, it is simply a data that will describe the lens. The optician will (in most cases) not see this options and will allow optician software to make filters on this kind of lens. This options being hidden or included will never be transmitted in EDI orders because it is an integral part of the lens.
Creating a Blue Cut
A blue cut lens is a lens that must contain a blue cut options that will be associated to the minimum mandatory included. Usually the combinations lens-options is mandatory, included and hidden.
It will be necessary to:
1.Create a Lens
Create a blue cut option (type of surface treatment options). (Check only Blue light cut)
Combine the lens and the options in Mandatory, Included and Hidden.
Setting Prism and Cylinder Options
Often you have in your catalogues with prisms or cylinder options associated with your RX lenses. This is where you need to set them up. This kind of options can be set as mandatory and/or included, the minimum and maximum terminals that you enter will allow you to trigger when entering the options without any action from the optician.
If you have two Prism options (Prism < 4 and Prism >= 4), the minimum and maximum values of these two options must be indicated in the Measurements box:
Prism < 4: Minimum value = 0.25 and maximum value = 3.75
Prism >= 4: Minimum value = 4 and the maximum value can be limited or left empty.
In these two examples, three cases are possible:
The optician does not enter a prism value: the surcharge will not be included in the order.
The optician enters a prism of 2.25: the Prism < 4 options will apply if it is included or must be entered if it is simply mandatory.
The optician enters a prism of 6.5: the Prism >= 4 options will apply if it is included or must be entered if it is simply mandatory.
© 2018 iZySolutions