This screen summarizes all tracers already configured on the application. A double click on a line allows to edit tracer's configuration.

•  : Initializes the listening of a tracer, no file can be received or transmitted without a tracer connected.
•   Favorite: This feature allows you to program the application in order to connect to tracer when iZyShape is started or when tracer button of a compatible WebShop is pressed.
•   Status:
  • For a Series tracer, port name must appear, otherwise you must reassign a port with the mouse right click on the tracer desired.
  • For an IP tracer (RJ-45), globe indicates that tracer is detected on network.
•   Connection: This icon indicates if you are connected to the tracer. It is impossible to really know if a Series tracer is well connected because technology does not allow it. On the other hand, if an Ethernet tracer is indicated as connected, tracing will cause transmission of a shape file.

By right-clicking on a tracer, a context menu appears:

SERIE: 

•  Port: Selects a COM port from those detected on the computer.
•  Settings*: Appears only after receiving a form file or Nidek protocol.

ETHERNET:

•  Settings*: Appears when connected to the tracer.

Parameters*: This tab is used to define the format of acquired files. In practice, default formats of tracers are supported and does not require any additional parameterization.

ANY TYPE OF TRACER

• Connection/ Disconnection: Same effect as buttons on tracers board
•  Remove: Delete tracer permanently from the list